| No. | Brand | Z | D | e | S | J | G | L | b |
| MVYR-250 | SMITH | - | - | - | - | - | - | - | - |
| MPYR-125 | SMITH | - | - | - | - | - | - | 150 mm | - |
| MCR-72-BC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-62-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-7/8-XBE | SMITH | 40.8 mm | - | 19 mm | - | 63.5 mm | - | - | - |
| YAF-04 | SMITH | - | - | - | - | - | - | - | - |
| MUTD-50110 | SMITH | - | - | - | - | - | M6x1 | - | - |
| YR-3-1/2 | SMITH | - | - | - | - | - | - | - | - |
| YR-3-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| YR-1-3/4-C | SMITH | - | - | - | 24.5 mm | - | - | - | - |
| PYR-3 | SMITH | - | - | - | - | - | R1/8" | 61 mm | - |
| MFYR-85 | SMITH | - | - | - | 12 mm | - | - | - | - |
| IRR-3 | SMITH | - | - | - | - | - | - | - | - |
| BCR-5/8-XB | SMITH | - | - | - | - | - | - | - | - |
| YAD-20 | SMITH | - | - | - | - | - | - | - | - |
| PYR-3-1/4 | SMITH | - | - | - | - | - | - | - | - |
| MCR-72-C | SMITH | - | - | - | - | - | - | - | - |
| MFCR-52 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-19-S | SMITH | - | - | - | - | - | - | - | - |
| IRR-2-1/4 | SMITH | - | - | - | - | - | - | - | - |
| HR-3-X | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-1/2-B | SMITH | - | - | - | - | - | - | - | - |
| IRR-2-5/8 | SMITH | 18.5 mm | - | - | - | - | R1/8" | - | - |
| CR-1/2-AX | SMITH | - | - | - | - | - | - | - | 9 mm |
| CR-1-7/8-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
| HR-1-1/4-C | SMITH | - | - | - | - | - | - | - | - |
| SMITH MYR-10-SC Cam Follower and Track Roller - Yoke Type | Volume Discount:Available; Width T(mm):30; Flange O.D. H(φ):44; Number of Bearings:Double; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:No; |
| SMITH YR-3-1/2-C Cam Follower and Track Roller - Yoke Type | Lubrication Type:Relubricatable; Angle between Set Screws:90 º; Material:Bearing Steel; Weight:0.50 lb; Seal Type:Narrow Shroud; Outside Ring Width C:14.000 mm; Outside Diameter D:1.850 in; Dynamic Load Rating:3190 lbf; Center of Bearing from End S:8.86 mm; O.D. Type:Cylindrical OD; |
| SMITH BYR-1-7/8 Cam Follower and Track Roller - Yoke Type | Unit Body Material:Cast Iron; Lubrication method:Oil Supply Type; Surface Treatment:No; Seal:No; Temperature Properties:Standard; Cover Type:No; Unit, Type:Bearing unit; |
| SMITH MUTD-25 Cam Follower and Track Roller - Yoke Type | Type:Bearings with Housin; Bearing Part Number:6008; Bearing Used:Deep Groove Ball Bea; RoHS:6; Number of Bearings:Double; Days to Ship:8 Days or more; Flange Shape:Compact Type; Width T(mm):50 ～ 120; Holder Surface Treatment:Electroless Nickel P; Seals:ZZ (Double Shield); |
| SMITH CR-1-B Cam Follower and Track Roller - Stud Type | N:22mm; L1:70 mm; s1:19.05 mm; A2:28 mm; L:113 mm; C:19.5 kN; B:38.1 mm; Recommended tightening torque for set screw:3.7 Nm; H1:89 mm; L3:57 mm; |
| SMITH MCRV-52-SBC Cam Follower and Track Roller - Stud Type | A2:46 mm; s1:17 mm; J:102 mm; B:34 mm; A:36 mm; C:29.6 kN; L:130 mm; Designation of bearing:US208-24G2T04; S:9 mm; e:21 mm; |
| SMITH CR-2-3/4-B Cam Follower and Track Roller - Stud Type | Designation of housing:T209N-; N1:19 mm; A5:30.2 mm; Recommended tightening torque for set screw:8 Nm; S:19 mm; Weight:2.34 kg; Z:24.4 mm; SW:3.97 mm; d:42.86 mm; H:117 mm; |
| SMITH MCR-32-BC Cam Follower and Track Roller - Stud Type | T max.:100 °C; N:20mm; C:35.1 kN; J:159 mm; A:70 mm; Z:74.6 mm; N1:25 mm; Designation of bearing:UC210-30G2T04; L:206 mm; Dz:100 mm; |
| SMITH MCRV-19-C Cam Follower and Track Roller - Stud Type | B:18 mm; Nlim (grease):12,000 rpm; Y0:1.6; Y1:1.5; Static load, C0:3.45 kN; e:0.41; Brand:NTN; Ce min:5 mm; Nlim (oil):14,000 rpm; Dynamic load, C:12.4 kN; |
| SMITH HR-3-1/4-B Cam Follower and Track Roller - Stud Type | L:117 mm; Z:29.6 mm; G:M6x1; B:42.9 mm; Recommended tightening torque for set screw:8 Nm; A2:44.4 mm; Designation of housing:F207N-; T min.:-20 °C; N:14mm; e:19 mm; |
| SMITH CR-1-7/8-XBC-SS Cam Follower and Track Roller - Stud Type | Bearing Number:22213; e - Geometry Factor:0.24; Dimension D Max:8.63 in; Dimension L:3.59 in; Housing Style:Two-Bolt Pillow Bloc; Grease Lubrication - B/C/O Seal:1500 rpm; Shaft Tolerance:0.0015 in; Dimension M:2.13 in; Dimension F:10.250 in; Dimension H:1.38 in; |
| SMITH CR-1-3/4-XBC-SS Cam Follower and Track Roller - Stud Type | L1:54.5 mm; N1:29 mm; G:R1/8"; Z:84.5 mm; C0:20.8 kN; H:54 mm; B:30.2 mm; N:14mm; S:11 mm; T min.:-20 °C; |
SMITH PCR-1-1/2-E Cam Follower and Track Roller - Stud Type Video