| SMITH MUTD-50110 Cam Follower and Track Roller - Yoke Type | Weight:2.33 kg; T max.:100 °C; C0:24 kN; G:M6x1; Recommended tightening torque for set screw:16.8 Nm; s1:41.25 mm; Designation of housing:C308-; d1:63.5 mm; C:40.56 kN; A3:3 mm; |
| SMITH MCRV-90 Cam Follower and Track Roller - Stud Type | db - Cone Backface Backing Diameter:32.51 mm; Cage Type:Stamped Steel; G2 - Heat Generation Factor (Rib-Roller End):5.9; B:23.818 mm; Db - Cup Backface Backing Diameter:46.99 mm; Design Units:Imperial; C90 - Dynamic Radial Rating (90 million revolutions)4:3710 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1470 lbf; R - Cone Backface To Clear Radius1:2.290 mm; Series:2300; |
| SMITH MYR-35-SC Cam Follower and Track Roller - Yoke Type | Characteristic outer ring frequency, BPF0:18.67 Hz; Fw:56 mm; Nlim (grease):5,000 rpm; Characteristic cage frequency, FTF:0.48 Hz; b:17.8 mm; Mass:0.03 kg; Ew:61 mm; Characteristic inner ring frequency, BPFI:20.33 Hz; Dw:2.5 mm; Cr:23.3 kN; |
| SMITH MCR-19-S Cam Follower and Track Roller - Stud Type | Holder Surface Treatment:Clear Anodize; Bearing I.D. d(mm):12; Volume Discount:Available; Number of Bearings:Double; Housing Material:[Aluminum Alloy] 201; Bearing Material:[Steel] Steel; Width T(mm):35; RoHS:6; |
| SMITH CR-9/16-C Cam Follower and Track Roller - Stud Type | Radial clearance class:C4; Associated sleeve reference:H2320; Y1:2.18; Max operating temperature, Tmax:200 °C; Number of lubrication holes:3; e:0.31; Characteristic cage frequency, FTF:0.42 Hz; Static load, C0:661 kN; Dynamic load, C:586 kN; k:4.5 mm; |
| SMITH MFCR-52 Cam Follower and Track Roller - Stud Type | Housing:FSNT 218; Cage Type:EJ; End Cover1:EC218; A:140.00 mm; J1:58 mm; Shaft Diameter db:100 mm; UPC Code:999999999; H1:100.0 mm; C1 Dynamic Load Rating:436; Material :Cast Iron; |
| SMITH YR-3/4-X Cam Follower and Track Roller - Yoke Type | Lubrication method:Oil Supply Type; Unit Body Material:Cast Iron; Basic Dynamic Load Rating Cr(N):143000; d:90; Surface Treatment:No; Unit, Type:Bearing unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; Heat Resistant Characteristics:Standard; Rolling Element Material:Steel; |
| SMITH MCR-30-SBC Cam Follower and Track Roller - Stud Type | d:31.75 mm; T max.:100 °C; B:48 mm; Weight:2.37 kg; Designation of housing:FS307-; Recommended tightening torque for set screw:8 Nm; H3:100; L:135 mm; J:100 mm; A4:27 mm; |
| SMITH YR-3-1/2-C Cam Follower and Track Roller - Yoke Type | Lubrication Type:Relubricatable; Angle between Set Screws:90 º; Material:Bearing Steel; Weight:0.50 lb; Seal Type:Narrow Shroud; Outside Ring Width C:14.000 mm; Outside Diameter D:1.850 in; Dynamic Load Rating:3190 lbf; Center of Bearing from End S:8.86 mm; O.D. Type:Cylindrical OD; |
| SMITH MYR-45-C Cam Follower and Track Roller - Yoke Type | r:1.1; C1:5.8 mm; G:M8x1; d1:51.1 mm; d:35 mm; S:18.8 mm; B1:51.1 mm; Weight:0.6 kg; B2:17.5 mm; D:72 mm; |
| SMITH YAG-24 Cam Follower and Track Roller - Yoke Type | Appropriate Withdrawal Nut No.:HM3180; Thread D12:Tr400x5; e:9.0 mm; t:15 mm; d1:360.00 mm; L1:284.00 mm; Ro:G1/4; Appropriate Hydraulic Nut:HMV80; Weight:42.10 Kg; |
| SMITH CR-1/2 Cam Follower and Track Roller - Stud Type | Shape:T-Shaped; Days to Ship:8 Days; Bearing Part Number:6004; Thickness T(mm):51 ～ 80; RoHS:6; Lateral Width L(mm):82; C Chamfered:Not Provided; Thickness, Height Indication:T, h Configurable; Holder Surface Treatment:Clear Anodize; Height H(mm):30 ～ 60; |