| SMITH BCR-3/4-XC Cam Follower and Track Roller - Stud Type | Static load, C0:336 kN; rs min:3 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:295 kN; r1a max:2.5 mm; Characteristic outer ring frequency, BPF0:5.64 Hz; Characteristic rolling element frequency, BSF:4.96 Hz; Dc max:158 mm; Fatigue limit load, Cu:37.5 kN; Nref:3,600 rpm; |
| SMITH IRR-3 Roller Bearings | Features:Non-Contact Seals; Outside Diameter D:210.000 mm; Outside Ring Width B:33.000 mm; Clearance:C3; Radius Rs min:2.000 mm; Oil Reference Speed:5600 rpm; C0r - Static Load Rating:101.8 kN; Cr - Dynamic Load Rating:110 kN; Grease Reference Speed:3800 rpm; Bore Size d:140 mm; |
| SMITH CR-3/4-X Cam Follower and Track Roller - Stud Type | a - Effective Center Location3:-0.37 in; C0 - Static Radial Rating:18400 lbf; D:2.6150 in; Cg - Geometry Factor11:0.0598; C1 - Cup Flange Width:0.1560 in; G2 - Heat Generation Factor (Rib-Roller End):8; da - Cone Frontface Backing Diameter:1.42 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1940 lbf; Design Units:Imperial; C90 - Dynamic Radial Rating (90 million revolutions)4:4470 lbf; |
| SMITH CR-2-1/2-C Cam Follower and Track Roller - Stud Type | Characteristic inner ring frequency, BPFI:5.43 Hz; da min:35 mm; Brand:SNR; d1:37.9 mm; Characteristic cage frequency, FTF:0.4 Hz; Static load, C0:0.01 kN; D1:55.1 mm; d:30 mm; Characteristic rolling element frequency, BSF:4.62 Hz; D:62 mm; |
| SMITH PYR-5 Cam Follower and Track Roller - Yoke Type | Specifications/Environment:Standard; Type:Thrust Ball; Types:Flat Surface Washer; D:105; O.D.(Ø):105; Number of Raceway Ring Rows:Single Row; Retainer Type:Punching; Specifications, Environment:Standard; d:55; B:35; |
| SMITH MCRV-52-SBC Cam Follower and Track Roller - Stud Type | A2:46 mm; s1:17 mm; J:102 mm; B:34 mm; A:36 mm; C:29.6 kN; L:130 mm; Designation of bearing:US208-24G2T04; S:9 mm; e:21 mm; |
| SMITH CR-1/2-A-C Cam Follower and Track Roller - Stud Type | Days to Ship:8 Days; Bearing I.D. d(mm):20; Number of Bearings:Double; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Seals:VV (Non-Contact Rubb; Shape:T-Shaped; Housing Material:1045 Carbon Steel; |
| SMITH HR-3-1/2-XB Cam Follower and Track Roller - Stud Type | Special Configurations Code:No; O.D.(Ø):140; Internal Symbol:No; Accuracy(Class):Class 0; B:33; Specifications, Environment:Standard; Torque Symbol:No; Size Standards:Metric System; Combination symbol:No; |
| SMITH YR-1-1/2-C Cam Follower and Track Roller - Yoke Type | B:49.2 mm; T max.:100 °C; C:31.85 kN; G:R1/8"; s1:24.6 mm; A:36.5 mm; A4:32.5 mm; e:20 mm; A2:50.2 mm; Recommended tightening torque for set screw:8 Nm; |
| SMITH PCR-1-1/4-E Ball Bearings | N:14mm; T min.:-20 °C; B1:43.7 mm; Designation of bearing:ES209G2T20; d1:62 mm; A:37.5 mm; Recommended tightening torque for set screw:11.5 Nm; A1:13 mm; e:24 mm; s1:33.4 mm; |
| SMITH HR-1/2-XC Cam Follower and Track Roller - Stud Type | Weight / Kilogram:0.068; Long Description:20MM Bore; 42MM Outs; Precision Class:ABEC 1 | ISO P0; Inch - Metric:Metric; Category:Single Row Ball Bear; Static load, C0:5.05 kN; Product Group:B00308; Snap Ring:No; Nlim (grease):18,000 rpm; Dynamic load, C:9.4 kN; |
| SMITH MYRV-5-C Cam Follower and Track Roller - Yoke Type | R - Cone Backface To Clear Radius1:0.09 in; Cup Part Number:552DC; db - Cone Backface Backing Diameter:2.6 in; T - Bearing Width across Cones:3.1249 in; Design Units:Imperial; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:74700 lbf; B - Cone Width:1.4440 in; Bearing Weight:10.36 lb; Cone Part Number:555; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:19400 lbf; |