| No. | Brand | Z | D | e | S | J | G | L | b |
| CR-2-1/2-C | SMITH | - | 62 mm | - | - | - | - | - | - |
| CR-1-3/4 | SMITH | - | - | - | - | - | - | - | - |
| MFCR-52 | SMITH | - | - | - | - | - | - | - | - |
| YR-3-X | SMITH | - | - | - | - | - | - | - | - |
| MFCR-72 | SMITH | - | 140 | - | - | - | - | - | - |
| HR-3/4-B | SMITH | - | 35 mm | - | - | - | - | - | - |
| DYR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| CR-1-3/4-XBC-SS | SMITH | 84.5 mm | - | - | 11 mm | - | R1/8" | - | - |
| BCR-2-1/2-X | SMITH | - | - | - | - | - | - | 129 mm | - |
| HR-3-1/2-XB | SMITH | - | - | - | - | - | - | - | - |
| MCRV-90 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-30-SC | SMITH | - | - | 10 mm | 11 mm | - | M6x1 | 165 mm | - |
| MCRV-35-S | SMITH | - | 140.000 mm | - | - | - | - | - | - |
| HR-2-1/2-XC | SMITH | 17.2 mm | - | - | - | - | M6x1 | 140 mm | - |
| BCR-2-BC | SMITH | - | 21 | - | - | - | - | - | - |
| MYR-35-C | SMITH | - | - | - | - | - | - | - | - |
| YAG-32 | SMITH | - | - | - | - | - | - | - | - |
| MCR-32 | SMITH | - | - | - | - | - | - | - | 10 mm |
| MCRV-52-SBC | SMITH | - | - | 21 mm | 9 mm | 102 mm | - | 130 mm | - |
| MCR-47-SC | SMITH | - | 55 | - | - | - | - | - | - |
| YR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
| BYR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
| MYRV-35 | SMITH | - | - | - | - | - | - | - | - |
| YAG-52 | SMITH | 83.7 mm | - | - | 30.9 mm | - | - | - | - |
| MCRV-32-SBC | SMITH | - | - | - | - | - | - | - | - |
| PCR-1-1/4-E | SMITH | - | - | 24 mm | - | - | - | - | - |
| SMITH PYR-3 Cam Follower and Track Roller - Yoke Type | G:R1/8"; T max.:100 °C; A1:10 mm; B:34 mm; d:15.88 mm; C:12.8 kN; B1:43.5 mm; s1:30.5 mm; L:61 mm; H:112 mm; |
| SMITH MCRV-90 Cam Follower and Track Roller - Stud Type | db - Cone Backface Backing Diameter:32.51 mm; Cage Type:Stamped Steel; G2 - Heat Generation Factor (Rib-Roller End):5.9; B:23.818 mm; Db - Cup Backface Backing Diameter:46.99 mm; Design Units:Imperial; C90 - Dynamic Radial Rating (90 million revolutions)4:3710 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1470 lbf; R - Cone Backface To Clear Radius1:2.290 mm; Series:2300; |
| SMITH IRR-2-7/16 Roller Bearings | Revolution Frequency(rpm):16000; Outer Ring Type:Flat; Basic Load Rating, Dynamic Rating(N):11800; Size Standards:Metric System; Inner/Outer Ring Material:Steel; Rolling Element Material:Steel; d:14; B:20; Specifications/Environment:Standard; |
| SMITH MFCR-52 Cam Follower and Track Roller - Stud Type | Housing:FSNT 218; Cage Type:EJ; End Cover1:EC218; A:140.00 mm; J1:58 mm; Shaft Diameter db:100 mm; UPC Code:999999999; H1:100.0 mm; C1 Dynamic Load Rating:436; Material :Cast Iron; |
| SMITH CR-1-3/4 Cam Follower and Track Roller - Stud Type | Material Symbol:No; Special Configurations Code:No; Basic Load Rating, Dynamic Rating(N):630000; Acoustic Symbol:E; Retainer Type:Punching; Symbol of Bearing Ring Shape:No; Raceway Ring Shape:Cylindrical Roller; Internal Symbol:No; Symbol of contact angle:No; Symbols of Lubrication Amount:No; |
| SMITH MCR-35 Cam Follower and Track Roller - Stud Type | d1:62 mm; H2:157 mm; A:70 mm; A1:36 mm; Recommended tightening torque for set screw:11.5 Nm; L1:62 mm; T min.:-20 °C; G:M6x1; Designation of housing:PH209N-; Designation of open end cover:SCOE209-45; |
| SMITH YR-1-1/2-C Cam Follower and Track Roller - Yoke Type | B:49.2 mm; T max.:100 °C; C:31.85 kN; G:R1/8"; s1:24.6 mm; A:36.5 mm; A4:32.5 mm; e:20 mm; A2:50.2 mm; Recommended tightening torque for set screw:8 Nm; |
| SMITH MCR-30-SBC Cam Follower and Track Roller - Stud Type | d:31.75 mm; T max.:100 °C; B:48 mm; Weight:2.37 kg; Designation of housing:FS307-; Recommended tightening torque for set screw:8 Nm; H3:100; L:135 mm; J:100 mm; A4:27 mm; |
| SMITH FCR-2-3/4-E Cam Follower and Track Roller - Stud Type | Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; RoHS:6; Bearing Used:Deep Groove Ball Bea; Width T(mm):10; Flange Shape:Compact Type; Shape:Flange Type; Bearing I.D. d(mm):5; |
| SMITH HR-1-5/8-C Cam Follower and Track Roller - Stud Type | SW:4 mm; T min.:-40 °C; S:24.6 mm; d1:67.2 mm; D:90 mm; C:23 mm; B:49.2 mm; r:1.1; B2:18.3 mm; C1:6.5 mm; |
| SMITH CR-1-3/8-XC Cam Follower and Track Roller - Stud Type | Characteristic outer ring frequency, BPF0:8.13 Hz; Characteristic cage frequency, FTF:0.43 Hz; Brand:SNR; e:0.22; B:31 mm; D:130 mm; rs min:1.5 mm; D1:117.8 mm; Nref:4,600 rpm; Max operating temperature, Tmax:200 °C; |
| SMITH BCR-2-3/4 Cam Follower and Track Roller - Stud Type | Dimension J:750 mm; Note:This product line wa; Series Type:Light Series; Maximum Speed:650 rpm; Cr - Dynamic Load Rating:208848 lbf; Bolt Size:4 x M36; Housing Width:8.5 in; Dimension H2:662 mm; Seal Type:Viton Single Lip; Dimension K:200 mm; |
SMITH YAG-24 Cam Follower and Track Roller - Yoke Type Video