| No. | Brand | Z | D | e | S | J | G | L | b |
| MYR-35-SC | SMITH | - | - | - | - | - | - | - | 17.8 mm |
| CR-1/2-X | SMITH | - | - | - | - | - | - | - | - |
| MYRV-50-C | SMITH | - | - | - | - | - | - | - | - |
| MCRV-40-SBC | SMITH | - | - | - | - | - | - | - | - |
| MCR-32-C | SMITH | - | 75.000 mm | - | - | - | - | - | - |
| CR-1-5/8-XB-SS | SMITH | - | 42 mm | - | - | - | - | - | - |
| BCR-3-BC | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
| BCR-1-1/2-XBC | SMITH | - | - | - | - | - | - | - | - |
| MCR-52-B | SMITH | - | - | - | - | - | - | - | - |
| CR-1-XBC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-16-BC | SMITH | - | - | - | - | - | - | - | - |
| MYRV-40 | SMITH | - | - | - | - | - | - | - | - |
| CR-2-3/4-B | SMITH | 24.4 mm | - | - | 19 mm | - | - | - | - |
| MYRV-17-C | SMITH | - | - | 34 mm | - | - | - | 175 mm | - |
| MCRV-30-SC | SMITH | - | - | 10 mm | 11 mm | - | M6x1 | 165 mm | - |
| MCR-72-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-A-C | SMITH | - | - | - | - | - | - | - | - |
| CR-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| CR-1-1/4-XBE | SMITH | - | - | - | - | - | - | - | - |
| IRR-3/8 | SMITH | - | - | 24 mm | 19 mm | - | - | - | - |
| CR-2-3/4-XB | SMITH | - | - | - | 31 mm | - | - | 195 mm | - |
| SMITH MCR-32-C Cam Follower and Track Roller - Stud Type | D:75.000 mm; Ce - Dynamic Radial Rating1:27000 N; Limiting Speed (Grease):17900 rpm; R - Inner Ring To Clear Radius2:1.0 mm; r - Outer Ring To Clear Radius3:1.0 mm; Bearing Width:16 mm; Da - Outer Ring Backing Diameter:69.300 mm; Cage Type:CR - Phenolic Outer; Design Units:METRIC; Ball Type:STEEL; |
| SMITH CR-1/2-A-C Cam Follower and Track Roller - Stud Type | Days to Ship:8 Days; Bearing I.D. d(mm):20; Number of Bearings:Double; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Seals:VV (Non-Contact Rubb; Shape:T-Shaped; Housing Material:1045 Carbon Steel; |
| SMITH HR-3-XB Cam Follower and Track Roller - Stud Type | S:19 mm; d:45 mm; Designation of open end cover:SCO209-45; Designation of closed end cover:SCC209; H:54 mm; Z:70 mm; s1:24.6 mm; N:17mm; Designation of housing:P209N-; A1:37 mm; |
| SMITH MCRV-35-S Cam Follower and Track Roller - Stud Type | B - Cone Width:32.000 mm; D:140.000 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:56300 N; Da - Cup Frontface Backing Diameter:134.87 mm; Cup Part Number:Y32018XSA; d:90 mm; Aa - Cage-Cone Backface Clearance:2.5 mm; G1 - Heat Generation Factor (Roller-Raceway):127.5; Design Units:METRIC; da - Cone Frontface Backing Diameter:98.04 mm; |
| SMITH MCRV-40-SBC Cam Follower and Track Roller - Stud Type | Type:Bearings with Housin; Number of Bearings:Double; Days to Ship:7 Days; Width T(mm):60 ～ 70; Bearing I.D. d(mm):17; Shape:Flanged Pilot Type; RoHS:6; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; |
| SMITH CR-9/16-C Cam Follower and Track Roller - Stud Type | Radial clearance class:C4; Associated sleeve reference:H2320; Y1:2.18; Max operating temperature, Tmax:200 °C; Number of lubrication holes:3; e:0.31; Characteristic cage frequency, FTF:0.42 Hz; Static load, C0:661 kN; Dynamic load, C:586 kN; k:4.5 mm; |
| SMITH HR-1-5/8-C Cam Follower and Track Roller - Stud Type | SW:4 mm; T min.:-40 °C; S:24.6 mm; d1:67.2 mm; D:90 mm; C:23 mm; B:49.2 mm; r:1.1; B2:18.3 mm; C1:6.5 mm; |
| SMITH HR-1-1/2-BC Cam Follower and Track Roller - Stud Type | T max.:100 °C; T min.:-20 °C; d:23.81 mm; C1:6.5 mm; B1:38 mm; Weight:0.6 kg; d1:45 mm; C0:15.2 kN; C:24 mm; B2:8 mm; |
| SMITH MCR-35-BC Cam Follower and Track Roller - Stud Type | Series:923000; Da - Cup Frontface Backing Diameter:16.06 in; e - ISO Factor4:0.34; r - Cup Frontface To Clear Radius2:0.06 in; Y - ISO Factor1:1.78; C - Double Cup Width:6.2500 in; D:17.5 in; Design Units:Imperial; Y2 - ISO Factor6:2.98; Cg - Geometry Factor7:0.153; |
| SMITH CR-1-B Cam Follower and Track Roller - Stud Type | N:22mm; L1:70 mm; s1:19.05 mm; A2:28 mm; L:113 mm; C:19.5 kN; B:38.1 mm; Recommended tightening torque for set screw:3.7 Nm; H1:89 mm; L3:57 mm; |
| SMITH BCR-2-BC Cam Follower and Track Roller - Stud Type | Rolling Element Material:Stainless Steel; Size Standards:Metric System; RoHS:6; Retainer Type:Punching; D:21; Volume Discount:Available; Type:Ball; Outer Ring Shape:Flat; Inner/Outer Ring Material:Stainless Steel; |
| SMITH CR-3-X Cam Follower and Track Roller - Stud Type | Dz:100 mm; C:35.1 kN; d:49.21 mm; T max.:100 °C; Designation of bearing:UC210-31G2; s1:25.8 mm; A:40 mm; G:M6x1; S:19 mm; T min.:-20 °C; |
SMITH HR-3-1/2-XB Cam Follower and Track Roller - Stud Type Video