No. | Brand | Z | D | e | S | J | G | L | b |
MYR-45-C | SMITH | - | 72 mm | - | 18.8 mm | - | M8x1 | - | - |
HR-4-BC | SMITH | - | - | - | - | - | - | - | - |
PYR-5 | SMITH | - | 105 | - | - | - | - | - | - |
MCR-32-C | SMITH | - | 75.000 mm | - | - | - | - | - | - |
DYR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
YR-3-X | SMITH | - | - | - | - | - | - | - | - |
MYR-35-C | SMITH | - | - | - | - | - | - | - | - |
CR-1-7/8-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
YR-3-1/2 | SMITH | - | - | - | - | - | - | - | - |
BYR-2-1/2-XC | SMITH | - | - | - | - | - | - | - | - |
MYRV-50-C | SMITH | - | - | - | - | - | - | - | - |
MFYR-85 | SMITH | - | - | - | 12 mm | - | - | - | - |
MCR-52-B | SMITH | - | - | - | - | - | - | - | - |
MFCR-52 | SMITH | - | - | - | - | - | - | - | - |
HR-1-1/4-C | SMITH | - | - | - | - | - | - | - | - |
MCRV-35-S | SMITH | - | 140.000 mm | - | - | - | - | - | - |
MCR-35-S | SMITH | - | - | - | - | - | - | - | - |
MCR-62-SB | SMITH | - | - | - | - | 118 mm | - | 150 mm | - |
YR-3/4-X | SMITH | - | - | - | - | - | - | - | - |
MUTD-50110 | SMITH | - | - | - | - | - | M6x1 | - | - |
CR-1-3/4-XBC-SS | SMITH | 84.5 mm | - | - | 11 mm | - | R1/8" | - | - |
YR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
MCR-35 | SMITH | - | - | - | - | - | M6x1 | - | - |
MPYR-125 | SMITH | - | - | - | - | - | - | 150 mm | - |
CR-3-X | SMITH | - | - | - | 19 mm | - | M6x1 | - | - |
MYRV-5-C | SMITH | - | - | - | - | - | - | - | - |
CR-2-3/4-C | SMITH | - | - | - | - | - | - | - | - |
SMITH MCR-35-S Cam Follower and Track Roller - Stud Type | Dimension N:17.2 in; Bearing - Housing - Seal:LSE503BRH; Dimension Y:0.9 in; Shaft Size:5-3/16 in; Maximum Speed:1570 rpm; Bearing UPC:013992059086; Dimension S:3.0 in; Bearing Type:Split Cylindrical Re; Seal Type:Felt Seal; Cr - Dynamic Load Rating:94869 lbf; |
SMITH YAG-52 Cam Follower and Track Roller - Yoke Type | B:61.8 mm; A:48 mm; S:30.9 mm; C0:32.8 kN; A1:15 mm; Dz:120 mm; Z:83.7 mm; A4:36 mm; Recommended tightening torque for set screw:22 Nm; Designation of housing:FC212N-; |
SMITH MYR-45-C Cam Follower and Track Roller - Yoke Type | r:1.1; C1:5.8 mm; G:M8x1; d1:51.1 mm; d:35 mm; S:18.8 mm; B1:51.1 mm; Weight:0.6 kg; B2:17.5 mm; D:72 mm; |
SMITH MCRV-47-SC Cam Follower and Track Roller - Stud Type | r - Cup Backface To Clear Radius2:2.29 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3450 lbf; Y - ISO Factor9:1.7; Da - Cup Frontface Backing Diameter:63.00 mm; B - Cone Width:20.638 mm; db - Cone Backface Backing Diameter:45.97 mm; d:34.925 mm; Cage Type:Stamped Steel; Series:14500; e - ISO Factor8:0.35; |
SMITH MCRV-30-SC Cam Follower and Track Roller - Stud Type | L:165 mm; A2:42.7 mm; e:10 mm; G:M6x1; Weight:2.9 kg; T max.:100 °C; S:11 mm; d:50 mm; Recommended tightening torque for set screw:11.5 Nm; C:35.1 kN; |
SMITH DYR-5 Cam Follower and Track Roller - Yoke Type | Shaft Size Type:Imperial; Grease Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - M/N Seal:900 rpm; UPC Code:0883450089241; Shaft Size :3-3/4 in; Dimension D Min:10.88 in; Dimension C:5.5 in; Y2 - Geometry Factor:4.06; Eng Internal Radial Clearance - Min:0.0053; Dimension RVV:0.58 in; |
SMITH HR-3-1/4-B Cam Follower and Track Roller - Stud Type | L:117 mm; Z:29.6 mm; G:M6x1; B:42.9 mm; Recommended tightening torque for set screw:8 Nm; A2:44.4 mm; Designation of housing:F207N-; T min.:-20 °C; N:14mm; e:19 mm; |
SMITH MVCR-76 Cam Follower and Track Roller - Stud Type | ra max:1 mm; Dynamic load, C:14 kN; D:52 mm; f0:13.9; Fatigue limit load, Cu:0.36 kN; Max operating temperature, Tmax:110 °C; Min operating temperature, Tmin:-25 °C; Radial clearance class:C4; Nlim (grease):8,900 rpm; Characteristic cage frequency, FTF:0.4 Hz; |
SMITH YR-1-7/8-X-SS Cam Follower and Track Roller - Yoke Type | High-Speed Steel:Standard; Internal Clearance Symbol:CN (Normal Clearance; Inner/Outer Ring Material:Steel; Rolling Element Material:Steel; Basic Load Rating, Dynamic Rating(N):315000; Specifications/Environment:Standard; Large-capacity type:Standard; RoHS:6; |
SMITH HR-3-1/2-XB Cam Follower and Track Roller - Stud Type | Special Configurations Code:No; O.D.(Ø):140; Internal Symbol:No; Accuracy(Class):Class 0; B:33; Specifications, Environment:Standard; Torque Symbol:No; Size Standards:Metric System; Combination symbol:No; |
SMITH BYR-7/8-X Cam Follower and Track Roller - Yoke Type | Recommended tightening torque for set screw:8 Nm; J:82.6 mm; C:25.7 kN; A1:27 mm; L:103 mm; E:12.5 mm; Z:58.9 mm; S:17.5 mm; Designation of open end cover:SCOU207-23; Weight:1.3 kg; |
SMITH HR-2-1/2-XC Cam Follower and Track Roller - Stud Type | T max.:100 °C; G:M6x1; Designation of housing:P205N-; Z:17.2 mm; H2:70 mm; T min.:-20 °C; L:140 mm; N:13mm; Recommended tightening torque for set screw:5.5 Nm; H1:16 mm; |
SMITH MVCR-32 Cam Follower and Track Roller - Stud Type Video