| No. | Brand | Z | D | e | S | J | G | L | b |
| MCR-62-SB | SMITH | - | - | - | - | 118 mm | - | 150 mm | - |
| MYRV-35 | SMITH | - | - | - | - | - | - | - | - |
| YR-3-X | SMITH | - | - | - | - | - | - | - | - |
| YR-1-3/4-C | SMITH | - | - | - | 24.5 mm | - | - | - | - |
| HR-1-1/2-BC | SMITH | - | - | - | - | - | - | - | - |
| MUTD-25 | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-A | SMITH | - | - | - | - | 117 mm | M6x1 | 80 mm | - |
| BCR-5/8-XB | SMITH | - | - | - | - | - | - | - | - |
| MYR-10-SC | SMITH | - | - | - | - | - | - | - | - |
| HR-3-XB | SMITH | 70 mm | - | - | 19 mm | - | - | - | - |
| HR-3-1/4-C | SMITH | - | - | - | - | - | - | - | 3 mm |
| BCR-2-BC | SMITH | - | 21 | - | - | - | - | - | - |
| MUTD-20 | SMITH | - | - | - | 21.4 mm | - | M6x1 | 155 mm | - |
| BYR-2-1/2-XC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-47-SC | SMITH | - | - | - | - | - | - | - | - |
| CR-5/8-XBEC | SMITH | 74.3 mm | - | 30 mm | 25.4 mm | 149 mm | - | 187 mm | - |
| YR-1-1/8-X | SMITH | - | - | - | - | - | - | - | - |
| BCR-3/4-XC | SMITH | - | - | - | - | - | - | - | - |
| MYRV-17-C | SMITH | - | - | 34 mm | - | - | - | 175 mm | - |
| MCRV-62-C | SMITH | - | - | - | - | - | - | - | - |
| YAG-32 | SMITH | - | - | - | - | - | - | - | - |
| BYR-1-XC | SMITH | - | 62 mm | - | - | - | - | - | - |
| SMITH YR-1-1/2-C Cam Follower and Track Roller - Yoke Type | B:49.2 mm; T max.:100 °C; C:31.85 kN; G:R1/8"; s1:24.6 mm; A:36.5 mm; A4:32.5 mm; e:20 mm; A2:50.2 mm; Recommended tightening torque for set screw:8 Nm; |
| SMITH CR-2-3/4-XB Cam Follower and Track Roller - Stud Type | B:61.9 mm; T max.:100 °C; L:195 mm; Designation of housing:FS312-; Weight:7.85 kg; A1:22 mm; Designation of bearing:EX312-36G2; Recommended tightening torque for set screw:16.8 Nm; S:31 mm; A2:67.4 mm; |
| SMITH MCR-32 Cam Follower and Track Roller - Stud Type | Characteristic cage frequency, FTF:0.45 Hz; Product Group:B04144; Brand:NTN; Dw:2 mm; Manufacturer Name:NTN; Bc:10 mm; b:10 mm; Characteristic rolling element frequency, BSF:9.4 Hz; Lw:7.8 mm; Ew:21 mm; |
| SMITH CR-1/2-A-C Cam Follower and Track Roller - Stud Type | Days to Ship:8 Days; Bearing I.D. d(mm):20; Number of Bearings:Double; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Seals:VV (Non-Contact Rubb; Shape:T-Shaped; Housing Material:1045 Carbon Steel; |
| SMITH BCR-1-5/8-XC Cam Follower and Track Roller - Stud Type | Mass:0.14 kg; C:30 mm; Nlim (grease):6,000 rpm; Category:Bearings; Min operating temperature, Tmin:-20 °C; Fw:45 mm; C0r:85.5 kN; Radial clearance class:CN; Characteristic rolling element frequency, BSF:15.94 Hz; Cr:41 kN; |
| SMITH BCR-3/4-XC Cam Follower and Track Roller - Stud Type | Static load, C0:336 kN; rs min:3 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:295 kN; r1a max:2.5 mm; Characteristic outer ring frequency, BPF0:5.64 Hz; Characteristic rolling element frequency, BSF:4.96 Hz; Dc max:158 mm; Fatigue limit load, Cu:37.5 kN; Nref:3,600 rpm; |
| SMITH MYRV-35 Cam Follower and Track Roller - Yoke Type | Inner Ring Width B:34.92 mm; Dimension B1:1.748 in; Outside Diameter D:2.047 in; Outside Ring Width C:15.000 mm; Number of Set Screws:2; Sub Series:1..KPPB2,3,4; Seal Type:Shroud Seal; Shaft Size d:7/8 in; Bore Type:Cylindrical bore; Dimension B2:0.531 in; |
| SMITH HR-3-1/4-B Cam Follower and Track Roller - Stud Type | L:117 mm; Z:29.6 mm; G:M6x1; B:42.9 mm; Recommended tightening torque for set screw:8 Nm; A2:44.4 mm; Designation of housing:F207N-; T min.:-20 °C; N:14mm; e:19 mm; |
| SMITH HR-2-1/2-XC Cam Follower and Track Roller - Stud Type | T max.:100 °C; G:M6x1; Designation of housing:P205N-; Z:17.2 mm; H2:70 mm; T min.:-20 °C; L:140 mm; N:13mm; Recommended tightening torque for set screw:5.5 Nm; H1:16 mm; |
| SMITH BCR-2-1/2-X Cam Follower and Track Roller - Stud Type | A2:30 mm; N:22mm; N2:37 mm; Designation of open end cover:SCOU207-21; H2:64 mm; L:129 mm; H1:89 mm; Designation of bearing:UC207-21G2; H:102 mm; d:33.34 mm; |
| SMITH BYR-1-XC Cam Follower and Track Roller - Yoke Type | ra max:1 mm; D1:52.6 mm; Mass:0.22 kg; rNa max:0.5 mm; Da max:55.5 mm; Min operating temperature, Tmin:-40 °C; Radial clearance class:CN; Max operating temperature, Tmax:120 °C; D:62 mm; d1:33.6 mm; |
| SMITH MVYR-62 Cam Follower and Track Roller - Yoke Type | Fit:J7; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; B:112; Bearing Unit, Type:Pillow Type; Surface Treatment:No; Seal:Nitrile; Basic Load Rating, Dynamic Rating(N):133000; |
SMITH MCRV-19-C Cam Follower and Track Roller - Stud Type Video
smith bearing mcrv-19-bc - Cam Follower and Track Roller - BDI
19MM Roller Diameter; 11MM Roller Width; Flat Roller Surface Profile; 8MM Stud Diameter; M8X1.25 Thread Size; Standard Stud Stud Profile; Open Enclosure; ...
Smith Bearing MCRV-19-S Cam Follower Needle Roller ...
Smith Bearing MCRV-19-S Cam Follower Needle Roller Bearing, Single Row Stud Type, Full Complement Sealed, 19 mm: Amazon.com: Industrial & Scientific.
MCRV-19-SB - Detail - Manufacturer of Smith Bearing Cam ...
Specifications: (D) Roller O.D. (mm), 19. (C) Roller Width (mm), 11. (d) Stud Dia. (mm), 8. (B1) Stud Length (mm), 20. (C) Basic Dynamic Load Rating ...
Metric Need Bearing Cam Follower, MCRV-19 - Zoro Tools
Order Smith Bearing Metric Need Bearing Cam Follower, MCRV-19, MCRV-19 at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or sign ...
Accurate Bushing Company MCRV-19-C | Turtle & Hughes
Turtle & Hughes, established in 1923, is one of the nation's largest independent electrical and industrial distribution companies serving the industrial, ...
MCRV-19-BC | Metric Needle Bearing Cam Follower Full ...
Smith Bearing MCRV-19-BC. Metric Needle Bearing Cam Follower Full Compliment Stud Type Hex Head slot Cylindrical. Item #105097909. $73.34 each.
SMITH MCRV-19-C Cam Follower and Track Roller - Stud Type ...
What are the dimensions of a 1200 Reference Speed Rating (r/min): SMITH MCRV-19-C Cam Follower and Track Roller - Stud Type? Cam Follower and Track Roller ...