| No. | Brand | Z | D | e | S | J | G | L | b |
| HR-3-1/4-B | SMITH | 29.6 mm | - | 19 mm | - | - | M6x1 | 117 mm | - |
| BCR-2-1/2-X | SMITH | - | - | - | - | - | - | 129 mm | - |
| YR-3-1/2 | SMITH | - | - | - | - | - | - | - | - |
| MYR-35-SC | SMITH | - | - | - | - | - | - | - | 17.8 mm |
| CR-5/8-XBEC | SMITH | 74.3 mm | - | 30 mm | 25.4 mm | 149 mm | - | 187 mm | - |
| MYR-5-S | SMITH | - | - | - | - | - | - | - | - |
| CR-3-1/2-XC | SMITH | - | - | - | - | - | - | - | - |
| MFCR-76 | SMITH | - | - | 12.6 mm | 7.5 mm | 96 mm | - | - | - |
| CR-1-1/8-XBE | SMITH | - | - | - | - | - | - | 97 mm | - |
| CR-2-3/4-C | SMITH | - | - | - | - | - | - | - | - |
| MCR-19-S | SMITH | - | - | - | - | - | - | - | - |
| CR-2-1/2-C | SMITH | - | 62 mm | - | - | - | - | - | - |
| YR-3/4-X | SMITH | - | - | - | - | - | - | - | - |
| YR-3-1/2-C | SMITH | - | - | - | - | - | - | - | - |
| BCR-2-BC | SMITH | - | 21 | - | - | - | - | - | - |
| BYR-1-XC | SMITH | - | 62 mm | - | - | - | - | - | - |
| MCRV-47-SC | SMITH | - | - | - | - | - | - | - | - |
| CR-1-B | SMITH | - | - | - | - | - | - | 113 mm | - |
| HR-3/4-B | SMITH | - | 35 mm | - | - | - | - | - | - |
| MYRV-17-C | SMITH | - | - | 34 mm | - | - | - | 175 mm | - |
| MCR-16-BC | SMITH | - | - | - | - | - | - | - | - |
| MYRV-40-C | SMITH | - | 100 mm | - | - | - | - | - | - |
| CR-3-XC | SMITH | - | - | - | - | - | - | - | - |
| MYR-35-C | SMITH | - | - | - | - | - | - | - | - |
| HR-4-BC | SMITH | - | - | - | - | - | - | - | - |
| MCR-40-SB | SMITH | - | - | - | - | - | - | 70 mm | - |
| BCR-5/8-XB | SMITH | - | - | - | - | - | - | - | - |
| DYR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| SMITH BCR-1-1/2-XBC Cam Follower and Track Roller - Stud Type | d:55; Machining:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Take-Up Type; Fit:J7; Unit, Type:Insert Bearing Unit; Days to Ship:Quote; Basic Load Rating, Dynamic Rating(N):43400; Surface Treatment:No; |
| SMITH BCR-2-1/2-X Cam Follower and Track Roller - Stud Type | A2:30 mm; N:22mm; N2:37 mm; Designation of open end cover:SCOU207-21; H2:64 mm; L:129 mm; H1:89 mm; Designation of bearing:UC207-21G2; H:102 mm; d:33.34 mm; |
| SMITH MCRV-62-B Cam Follower and Track Roller - Stud Type | Db min:91 mm; Da max:86.5 mm; db min:63.5 mm; rs min:1.5 mm; Characteristic rolling element frequency, BSF:7.49 Hz; Max operating temperature, Tmax:120 °C; d1:75.5 mm; Dynamic load, C:111 kN; Min operating temperature, Tmin:-40 °C; Nlim (oil):5,200 rpm; |
| SMITH MFYR-85 Cam Follower and Track Roller - Yoke Type | d:57.15 mm; B1:49.3 mm; Designation of housing:PE212-; T min.:-20 °C; H2:140 mm; d1:82 mm; S:12 mm; H:69.9 mm; Weight:4.6 kg; L1:71 mm; |
| SMITH CR-9/16-C Cam Follower and Track Roller - Stud Type | Radial clearance class:C4; Associated sleeve reference:H2320; Y1:2.18; Max operating temperature, Tmax:200 °C; Number of lubrication holes:3; e:0.31; Characteristic cage frequency, FTF:0.42 Hz; Static load, C0:661 kN; Dynamic load, C:586 kN; k:4.5 mm; |
| SMITH HR-1-1/4-C Cam Follower and Track Roller - Stud Type | Fit:J7; Unit Body Material:Cast Iron; Days to Ship:8 Days; Surface Treatment:No; Stroke:No; Diameter series symbol:Medium Load; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; RoHS:6; |
| SMITH CR-3-X Cam Follower and Track Roller - Stud Type | Dz:100 mm; C:35.1 kN; d:49.21 mm; T max.:100 °C; Designation of bearing:UC210-31G2; s1:25.8 mm; A:40 mm; G:M6x1; S:19 mm; T min.:-20 °C; |
| SMITH MCR-52-B Cam Follower and Track Roller - Stud Type | Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:606; Shape:Flanged Pilot Type; Flange O.D. H(φ):41; Housing Material:304 Stainless Steel; Bearing I.D. d(mm):6; Number of Bearings:Double; Holder Surface Treatment:Not Provided; |
| SMITH CR-1-1/4-XBE Cam Follower and Track Roller - Stud Type | Seals:ZZ (Double Shield); RoHS:6; Flange O.D. H(φ):54; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; |
| SMITH BCR-3/4-XC Cam Follower and Track Roller - Stud Type | Static load, C0:336 kN; rs min:3 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:295 kN; r1a max:2.5 mm; Characteristic outer ring frequency, BPF0:5.64 Hz; Characteristic rolling element frequency, BSF:4.96 Hz; Dc max:158 mm; Fatigue limit load, Cu:37.5 kN; Nref:3,600 rpm; |
| SMITH PCR-1-1/4-E Ball Bearings | N:14mm; T min.:-20 °C; B1:43.7 mm; Designation of bearing:ES209G2T20; d1:62 mm; A:37.5 mm; Recommended tightening torque for set screw:11.5 Nm; A1:13 mm; e:24 mm; s1:33.4 mm; |
| SMITH MCR-62-SB Cam Follower and Track Roller - Stud Type | A1:35 mm; C0:29.2 kN; B:32.5 mm; C:43.55 kN; H2:125 mm; L1:32 mm; L:150 mm; E:20 mm; Designation of bearing:ES211G2T04; J:118 mm; |
SMITH MCR-19-S Cam Follower and Track Roller - Stud Type Video
Smith Bearing | MCR-19-S | MCR Series Metric Cam Follower
Shop Smith Bearing MCR-19-S at Applied.com, which includes; Cam Follower, 19 mm OD Crowned Roller, 8 mm Standard Stud, M8 Thread, Slotted End, Sealed, ...
smith bearing mcr-19-s - Cam Follower and Track Roller - BDI
19MM Roller Diameter; 11MM Roller Width; Crowned Roller Surface Profile; 8MM Stud Diameter; M8X1.25 Thread Size; Standard Stud Stud Profile; ...
MCR19S Smith Cam Follower for sale online | eBay
Find many great new & used options and get the best deals for MCR19S Smith Cam Follower at the best online prices at eBay! Free shipping for many products!
Smith Bearing MCR-19 Cam Follower Needle Roller Bearing ...
Smith Bearing MCR-19 Cam Follower Needle Roller Bearing, Single Row Stud Type, Caged Unsealed, 19 mm: Amazon.com: Industrial & Scientific.Material: Stainless Steel, PlasticItem Diameter: 19.0 millimeters
Smith MCR-19-SB Caged Stud Type Hex Head slot Sealed ...
The MCR-19-SB is produced by Smith Bearings and is described as a Smith MCR-19-SB Caged Stud Type Hex Head slot Sealed Crowned Metric Needle Bearing Cam ...Weight: 31.0 lbTypically ships in: 1 day
MCR-19-S - Detail - Manufacturer of Smith Bearing Cam ...
(D) Roller O.D. (mm), 19 ... SMITH Bearing® Number, MCR-19-S ... outside surface) is mounted in a housing bore with the normal rolling bearing fit.
Metric Need Bearing Cam Follower, MCR-19-S - Zoro Tools
Order Smith Bearing Metric Need Bearing Cam Follower, MCR-19-S, MCR-19-S at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or ...