No. | Brand | Z | D | e | S | J | G | L | b |
CR-1/2-C | SMITH | 49.6 mm | - | 20 mm | - | - | - | - | - |
YR-3/4-X | SMITH | - | - | - | - | - | - | - | - |
MCR-47-B | SMITH | - | - | - | - | - | - | - | - |
MCR-16-BC | SMITH | - | - | - | - | - | - | - | - |
MCR-72-SBC | SMITH | - | - | - | - | - | - | - | - |
MCRV-47-SC | SMITH | - | - | - | - | - | - | - | - |
HR-3-1/4-B | SMITH | 29.6 mm | - | 19 mm | - | - | M6x1 | 117 mm | - |
YR-1-7/8-XC | SMITH | - | - | - | - | - | - | - | - |
MFCR-76 | SMITH | - | - | 12.6 mm | 7.5 mm | 96 mm | - | - | - |
CR-3-X | SMITH | - | - | - | 19 mm | - | M6x1 | - | - |
MFCR-52 | SMITH | - | - | - | - | - | - | - | - |
MCRV-62-B | SMITH | - | - | - | - | - | - | - | - |
BCR-2-1/2-X | SMITH | - | - | - | - | - | - | 129 mm | - |
MPYR-125 | SMITH | - | - | - | - | - | - | 150 mm | - |
MYRV-17-C | SMITH | - | - | 34 mm | - | - | - | 175 mm | - |
CR-1-7/8-XBC-SS | SMITH | - | - | - | - | - | - | - | - |
YR-1-1/2-C | SMITH | - | - | 20 mm | - | - | R1/8" | - | - |
MCRV-40-SBC | SMITH | - | - | - | - | - | - | - | - |
BYR-2-1/2-XC | SMITH | - | - | - | - | - | - | - | - |
BYR-1-7/8 | SMITH | - | - | - | - | - | - | - | - |
BYR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
YR-3-X | SMITH | - | - | - | - | - | - | - | - |
CR-3/4-C | SMITH | - | - | - | - | - | - | - | - |
PYR-5 | SMITH | - | 105 | - | - | - | - | - | - |
YR-1-7/8-X-SS | SMITH | - | - | - | - | - | - | - | - |
CR-2-1/2-XC | SMITH | - | - | - | - | - | - | - | - |
HR-2-3/4-BC | SMITH | - | - | - | - | - | - | - | - |
SMITH HR-7/8-XB Cam Follower and Track Roller - Stud Type | Bearing Retained:Yes (with retaining; Holder Surface Treatment:Clear Anodize; Bearing Part Number:6903; Bearing I.D. d(mm):17; Flange Shape:Square Type; Days to Ship:7 Days; Flange O.D. H(φ):60; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; |
SMITH CR-5/8-XBEC Cam Follower and Track Roller - Stud Type | Recommended tightening torque for set screw:33 Nm; e:30 mm; Z:74.3 mm; L:187 mm; J:149 mm; T max.:100 °C; Designation of open end cover:SCO213-65; A:50 mm; S:25.4 mm; A2:69.7 mm; |
SMITH HR-3-1/2-XB Cam Follower and Track Roller - Stud Type | Special Configurations Code:No; O.D.(Ø):140; Internal Symbol:No; Accuracy(Class):Class 0; B:33; Specifications, Environment:Standard; Torque Symbol:No; Size Standards:Metric System; Combination symbol:No; |
SMITH CR-9/16-C Cam Follower and Track Roller - Stud Type | Radial clearance class:C4; Associated sleeve reference:H2320; Y1:2.18; Max operating temperature, Tmax:200 °C; Number of lubrication holes:3; e:0.31; Characteristic cage frequency, FTF:0.42 Hz; Static load, C0:661 kN; Dynamic load, C:586 kN; k:4.5 mm; |
SMITH CR-1-XBC Cam Follower and Track Roller - Stud Type | Inner/Outer Ring Material:440C Stainless Steel; Precision:Grade 0; Basic Static Load Rating Cor(N):24000; The material of a ball:440C Stainless Steel; Load Direction:Radial Load; Width(mm):23; Features:Heat resistant / Ant; Basic Dynamic Load Rating Cr(N):40700; |
SMITH MCRV-62-C Cam Follower and Track Roller - Stud Type | Dimension G:4.6 in; Dimension Y:2.0 in; Cr - Dynamic Load Rating:18659 lbf; Dimension X (Thread):1 - 8 UNC; Dimension H:3.0 in; Dimension C:2.362 in; Bearing UPC:013992025517; Series Type:Light Series; Bearing - Housing - Seal:LSE111BXHGHTPS; Bearing Number:LSE111BX; |
SMITH YR-1-3/4-C Cam Follower and Track Roller - Yoke Type | s1:51.5 mm; S:24.5 mm; A5:30.5 mm; d1:120 mm; C0:71.5 kN; C:96 kN; SW:5.56 mm; T min.:-40 °C; B:55 mm; Recommended tightening torque for set screw:27.1 Nm; |
SMITH MCRV-62-B Cam Follower and Track Roller - Stud Type | Db min:91 mm; Da max:86.5 mm; db min:63.5 mm; rs min:1.5 mm; Characteristic rolling element frequency, BSF:7.49 Hz; Max operating temperature, Tmax:120 °C; d1:75.5 mm; Dynamic load, C:111 kN; Min operating temperature, Tmin:-40 °C; Nlim (oil):5,200 rpm; |
SMITH CR-1-B Cam Follower and Track Roller - Stud Type | N:22mm; L1:70 mm; s1:19.05 mm; A2:28 mm; L:113 mm; C:19.5 kN; B:38.1 mm; Recommended tightening torque for set screw:3.7 Nm; H1:89 mm; L3:57 mm; |
SMITH BCR-1-1/4 Cam Follower and Track Roller - Stud Type | L(inch):0.125 ~ 4; Days to Ship:8 Days; L Dimension Tolerance:+0.000/-0.005; RoHS:6; |
SMITH CR-2-3/4-XB Cam Follower and Track Roller - Stud Type | B:61.9 mm; T max.:100 °C; L:195 mm; Designation of housing:FS312-; Weight:7.85 kg; A1:22 mm; Designation of bearing:EX312-36G2; Recommended tightening torque for set screw:16.8 Nm; S:31 mm; A2:67.4 mm; |
SMITH CR-2-1/2-XC Cam Follower and Track Roller - Stud Type | Bearing I.D. d(mm):10; Flange Shape:Compact Type; Bearing Material:Stainless Steel; Number of Bearings:Double; Type:Bearings with Housin; Shape:Flange Type; Days to Ship:8 Days; Seals:ZZ (Double Shield); Width T(mm):40; |
SMITH YAG-52 Cam Follower and Track Roller - Yoke Type Video