| SMITH MCR-32-BC Cam Follower and Track Roller - Stud Type | T max.:100 °C; N:20mm; C:35.1 kN; J:159 mm; A:70 mm; Z:74.6 mm; N1:25 mm; Designation of bearing:UC210-30G2T04; L:206 mm; Dz:100 mm; |
| SMITH MYRV-35 Cam Follower and Track Roller - Yoke Type | Inner Ring Width B:34.92 mm; Dimension B1:1.748 in; Outside Diameter D:2.047 in; Outside Ring Width C:15.000 mm; Number of Set Screws:2; Sub Series:1..KPPB2,3,4; Seal Type:Shroud Seal; Shaft Size d:7/8 in; Bore Type:Cylindrical bore; Dimension B2:0.531 in; |
| SMITH MCRV-30-C Cam Follower and Track Roller - Stud Type | Bolt Size:2 x M30; Dimension J:470 mm; Dimension L:550 mm; Maximum Speed:1570 rpm; Cr - Dynamic Load Rating:94869 lbf; Bearing UPC:013992027221; Series Type:Light Series; Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing Type:Split Cylindrical Re; Shaft Size:5-7/16 in; |
| SMITH CR-2-1/2-C Cam Follower and Track Roller - Stud Type | Characteristic inner ring frequency, BPFI:5.43 Hz; da min:35 mm; Brand:SNR; d1:37.9 mm; Characteristic cage frequency, FTF:0.4 Hz; Static load, C0:0.01 kN; D1:55.1 mm; d:30 mm; Characteristic rolling element frequency, BSF:4.62 Hz; D:62 mm; |
| SMITH MCRV-40-SBC Cam Follower and Track Roller - Stud Type | Type:Bearings with Housin; Number of Bearings:Double; Days to Ship:7 Days; Width T(mm):60 ～ 70; Bearing I.D. d(mm):17; Shape:Flanged Pilot Type; RoHS:6; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; |
| SMITH CR-5/8-A Cam Follower and Track Roller - Stud Type | B:38.1 mm; J:117 mm; Dz:70 mm; Designation of closed end cover:SCC206; L1:72 mm; A2:40.2 mm; C0:11.2 kN; G:M6x1; s1:19.05 mm; L:80 mm; |
| SMITH MCRV-52-SBC Cam Follower and Track Roller - Stud Type | A2:46 mm; s1:17 mm; J:102 mm; B:34 mm; A:36 mm; C:29.6 kN; L:130 mm; Designation of bearing:US208-24G2T04; S:9 mm; e:21 mm; |
| SMITH MCRV-90 Cam Follower and Track Roller - Stud Type | db - Cone Backface Backing Diameter:32.51 mm; Cage Type:Stamped Steel; G2 - Heat Generation Factor (Rib-Roller End):5.9; B:23.818 mm; Db - Cup Backface Backing Diameter:46.99 mm; Design Units:Imperial; C90 - Dynamic Radial Rating (90 million revolutions)4:3710 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1470 lbf; R - Cone Backface To Clear Radius1:2.290 mm; Series:2300; |
| SMITH BYR-2-3/4 Cam Follower and Track Roller - Yoke Type | Seal, Shield:No; Lubricant:No; Retainer Type:No; Number of Raceway Ring Rows:Double Row; Rolling Element Material:Steel; Specifications/Environment:Standard; Specifications:Tapered hole; Raceway Ring Shape:Cylindrical Roller; Internal Clearance Symbol:No; Load Direction:Radial / Thrust; |
| SMITH MYR-35-SC Cam Follower and Track Roller - Yoke Type | Characteristic outer ring frequency, BPF0:18.67 Hz; Fw:56 mm; Nlim (grease):5,000 rpm; Characteristic cage frequency, FTF:0.48 Hz; b:17.8 mm; Mass:0.03 kg; Ew:61 mm; Characteristic inner ring frequency, BPFI:20.33 Hz; Dw:2.5 mm; Cr:23.3 kN; |
| SMITH YR-1-3/4-C Cam Follower and Track Roller - Yoke Type | s1:51.5 mm; S:24.5 mm; A5:30.5 mm; d1:120 mm; C0:71.5 kN; C:96 kN; SW:5.56 mm; T min.:-40 °C; B:55 mm; Recommended tightening torque for set screw:27.1 Nm; |
| SMITH HR-7/8-XB Cam Follower and Track Roller - Stud Type | Bearing Retained:Yes (with retaining; Holder Surface Treatment:Clear Anodize; Bearing Part Number:6903; Bearing I.D. d(mm):17; Flange Shape:Square Type; Days to Ship:7 Days; Flange O.D. H(φ):60; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; |