| No. | Brand | Z | D | e | S | J | G | L | b |
| MCR-35 | SMITH | - | - | - | - | - | M6x1 | - | - |
| HR-3/4-B | SMITH | - | 35 mm | - | - | - | - | - | - |
| BYR-2-3/4-XC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-72 | SMITH | - | - | - | - | - | - | - | - |
| MUTD-50110 | SMITH | - | - | - | - | - | M6x1 | - | - |
| MCRV-19-C | SMITH | - | - | 0.41 | - | - | - | - | - |
| BCR-1-1/4 | SMITH | - | - | - | - | - | - | - | - |
| MCR-62-SB | SMITH | - | - | - | - | 118 mm | - | 150 mm | - |
| MCR-32-C | SMITH | - | 75.000 mm | - | - | - | - | - | - |
| MYRV-50-C | SMITH | - | - | - | - | - | - | - | - |
| MUTD-20 | SMITH | - | - | - | 21.4 mm | - | M6x1 | 155 mm | - |
| YAG-52 | SMITH | 83.7 mm | - | - | 30.9 mm | - | - | - | - |
| MCRV-62-B | SMITH | - | - | - | - | - | - | - | - |
| CR-9/16-C | SMITH | - | - | 0.31 | - | - | - | - | - |
| PCR-1-1/2-E | SMITH | - | - | - | - | - | - | - | - |
| MCR-72-SBC | SMITH | - | - | - | - | - | - | - | - |
| MFCR-76 | SMITH | - | - | 12.6 mm | 7.5 mm | 96 mm | - | - | - |
| MYRV-40-C | SMITH | - | 100 mm | - | - | - | - | - | - |
| MCR-47-B | SMITH | - | - | - | - | - | - | - | - |
| BYR-2-1/2-XC | SMITH | - | - | - | - | - | - | - | - |
| SMITH CR-1-7/8-XBE Cam Follower and Track Roller - Stud Type | J:63.5 mm; Dz:54 mm; Designation of bearing:UC202G2; B:31 mm; A2:37.3 mm; e:19 mm; A:29.5 mm; T min.:-20 °C; Z:40.8 mm; d:15 mm; |
| SMITH CR-1/2-BC Cam Follower and Track Roller - Stud Type | Symbol of Bearing Ring Shape:E; Specifications:Standard; Precision Grade Symbol:No; Accuracy(Class):No; Internal Symbol:No; Outer Ring Type:Flat; Retainer Type:Momi removing; Size Standards:Metric System; Basic Load Rating, Static Rating(N):37500; Symbol of contact angle:No; |
| SMITH YR-3-X Cam Follower and Track Roller - Yoke Type | Designation of housing:FS324-; C:228 kN; B1:112 mm; A2:100.5 mm; T max.:100 °C; d1:155 mm; A:110 mm; N:41mm; B:87 mm; T min.:-20 °C; |
| SMITH MCRV-16-BC Cam Follower and Track Roller - Stud Type | DD:158.9 mm; d:90 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:534000 N; Cone Part Number:JHH221436; a - Effective Center Location4:-15 mm; Aa - Cage-Cone Backface Clearance:2 mm; Design Units:METRIC; B - Cone Width:57.531 mm; Cg - Geometry Factor:0.107; G2 - Heat Generation Factor (Rib-Roller End):28.4; |
| SMITH IRR-2-5/8 Roller Bearings | A:38 mm; Z:18.5 mm; E:12.5 mm; B:30 mm; G:R1/8"; T min.:-40 °C; T max.:100 °C; Weight:0.84 kg; C:19.5 kN; d:31.75 mm; |
| SMITH YR-3/4-X Cam Follower and Track Roller - Yoke Type | Lubrication method:Oil Supply Type; Unit Body Material:Cast Iron; Basic Dynamic Load Rating Cr(N):143000; d:90; Surface Treatment:No; Unit, Type:Bearing unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; Heat Resistant Characteristics:Standard; Rolling Element Material:Steel; |
| SMITH YR-3-1/2-C Cam Follower and Track Roller - Yoke Type | Lubrication Type:Relubricatable; Angle between Set Screws:90 º; Material:Bearing Steel; Weight:0.50 lb; Seal Type:Narrow Shroud; Outside Ring Width C:14.000 mm; Outside Diameter D:1.850 in; Dynamic Load Rating:3190 lbf; Center of Bearing from End S:8.86 mm; O.D. Type:Cylindrical OD; |
| SMITH CR-7/8-XBC-SS Cam Follower and Track Roller - Stud Type | B1:35 mm; A1:23 mm; T min.:-20 °C; L:84 mm; C0:7.88 kN; Weight:0.74 kg; N:M10; Designation of housing:PA205N-; C:14 kN; Z:17.2 mm; |
| SMITH MYR-45-C Cam Follower and Track Roller - Yoke Type | r:1.1; C1:5.8 mm; G:M8x1; d1:51.1 mm; d:35 mm; S:18.8 mm; B1:51.1 mm; Weight:0.6 kg; B2:17.5 mm; D:72 mm; |
| SMITH MCRV-19-C Cam Follower and Track Roller - Stud Type | B:18 mm; Nlim (grease):12,000 rpm; Y0:1.6; Y1:1.5; Static load, C0:3.45 kN; e:0.41; Brand:NTN; Ce min:5 mm; Nlim (oil):14,000 rpm; Dynamic load, C:12.4 kN; |
| SMITH YAD-20 Cam Follower and Track Roller - Yoke Type | Holder Surface Treatment:Clear Anodize; Flange O.D. H(φ):38; Bearing Material:[Steel] Steel; RoHS:6; Volume Discount:Available; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):5; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:625; |
| SMITH HR-1/2-XC Cam Follower and Track Roller - Stud Type | Weight / Kilogram:0.068; Long Description:20MM Bore; 42MM Outs; Precision Class:ABEC 1 | ISO P0; Inch - Metric:Metric; Category:Single Row Ball Bear; Static load, C0:5.05 kN; Product Group:B00308; Snap Ring:No; Nlim (grease):18,000 rpm; Dynamic load, C:9.4 kN; |
SMITH MCRV-30-C Cam Follower and Track Roller - Stud Type Video
MCRV-30-C SMITH - S43DJ34660 - bhq express
MCRV-30-C SMITH. ... MCRV-30-C SMITH. Item #: S43DJ34660. Manufacturer: SMITH. $60.19. Each. Quantity: ○ Add To Cart.
MCRV-30-C Full Compliment Stud Type Screwdriver slot Cylindrical ...
The MCRV-30-C is produced by Smith Bearings and is described as a MCRV-30-C Full Compliment Stud Type Screwdriver slot Cylindrical Metric Needle Bearing Cam ...
Metric Need Bearing Cam Follower, MCRV-62 - Zoro Tools
Order Smith Bearing Metric Need Bearing Cam Follower, MCRV-62, MCRV-62 at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or sign ...
SMITH MCRV-30-C Cam Follower and Track Roller - Stud Type ...
With over 10170 full-service 3210b-2rstn-qbl SKU: stores, our SMITH MCRV-30-C Cam Follower and Track Roller - Stud Type inventory is NTN Bearing Driveshaft ...
MCRV-30-S | Metric Needle Bearing Cam Follower Full ...
Shop Smith Bearing MCRV-30-S at Applied.com.
MCRV-30-C | Cam Follower and Track Roller - Stud Type
MCRV-30-C NEEDLE BRG CAM FOLLOWER ; FULL COMPL STUD TYPE HEX HEAD SLOT ... SMITH BEARING. Manufacturer Name. SMITH BEARING. Minimum Buy Quantity.
Accurate Bushing Company MCRV-30-C | Turtle & Hughes
MCRV-30-C METRIC CAM FOSMITH BEARING COMPANY Smith Bearing MCRV-30-C METRIC CAM FOLL. FEATURES. Recently Viewed Products. Availability By Branch