No. | Brand | Z | D | e | S | J | G | L | b |
CR-1-B | SMITH | - | - | - | - | - | - | 113 mm | - |
FCR-2-3/4-E | SMITH | - | - | - | - | - | - | - | - |
MYR-35-C | SMITH | - | - | - | - | - | - | - | - |
MCRV-30-C | SMITH | - | - | - | - | - | - | - | - |
YAG-52 | SMITH | 83.7 mm | - | - | 30.9 mm | - | - | - | - |
MCR-19-S | SMITH | - | - | - | - | - | - | - | - |
MCRV-19-C | SMITH | - | - | 0.41 | - | - | - | - | - |
MVCR-32 | SMITH | - | - | - | - | - | - | - | - |
MYRV-40-C | SMITH | - | 100 mm | - | - | - | - | - | - |
CR-1/2-C | SMITH | 49.6 mm | - | 20 mm | - | - | - | - | - |
MUTD-50110 | SMITH | - | - | - | - | - | M6x1 | - | - |
MCRV-32-SBC | SMITH | - | - | - | - | - | - | - | - |
MYRV-5-C | SMITH | - | - | - | - | - | - | - | - |
YAG-24 | SMITH | - | - | 9.0 mm | - | - | - | - | - |
YR-1-7/8-X-SS | SMITH | - | - | - | - | - | - | - | - |
HR-4-BC | SMITH | - | - | - | - | - | - | - | - |
CR-2-3/4-XB | SMITH | - | - | - | 31 mm | - | - | 195 mm | - |
CR-5/8-XBEC | SMITH | 74.3 mm | - | 30 mm | 25.4 mm | 149 mm | - | 187 mm | - |
CR-2-1/2-XC | SMITH | - | - | - | - | - | - | - | - |
BYR-1-XC | SMITH | - | 62 mm | - | - | - | - | - | - |
MFCR-52 | SMITH | - | - | - | - | - | - | - | - |
MPYR-125 | SMITH | - | - | - | - | - | - | 150 mm | - |
MYR-45-C | SMITH | - | 72 mm | - | 18.8 mm | - | M8x1 | - | - |
CR-7/8-XBC-SS | SMITH | 17.2 mm | - | - | - | - | - | 84 mm | - |
MCR-35-BC | SMITH | - | 17.5 in | - | - | - | - | - | - |
MCR-32-BC | SMITH | 74.6 mm | - | - | - | 159 mm | - | 206 mm | - |
CR-1-1/4-XBE | SMITH | - | - | - | - | - | - | - | - |
MYRV-17-C | SMITH | - | - | 34 mm | - | - | - | 175 mm | - |
MCRV-90 | SMITH | - | - | - | - | - | - | - | - |
CR-1/2 | SMITH | - | - | - | - | - | - | - | - |
SMITH MUTD-50110 Cam Follower and Track Roller - Yoke Type | Weight:2.33 kg; T max.:100 °C; C0:24 kN; G:M6x1; Recommended tightening torque for set screw:16.8 Nm; s1:41.25 mm; Designation of housing:C308-; d1:63.5 mm; C:40.56 kN; A3:3 mm; |
SMITH MPYR-125 Cam Follower and Track Roller - Yoke Type | Designation of open end cover:SCOE212-60; C0:32.8 kN; L:150 mm; C:52.5 kN; N:M16; H:69.8 mm; s1:39 mm; B1:49.3 mm; L1:50 mm; T min.:-20 °C; |
SMITH CR-2-3/4-C Cam Follower and Track Roller - Stud Type | Bearing Inner Dia. Shape:Cylindrical Bore Set; Accessory:No Cover; Bearing Unit, Type:Diamond Flange Shape; Seal:Nitrile; Rolling Element Material:Bearing Steel; Machining:Steel plate cover mo; Stroke:No; Grease Type:Standard Grease; Surface Treatment:No; Unit Body Material:Cast Iron; |
SMITH MCRV-47-SC Cam Follower and Track Roller - Stud Type | r - Cup Backface To Clear Radius2:2.29 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:3450 lbf; Y - ISO Factor9:1.7; Da - Cup Frontface Backing Diameter:63.00 mm; B - Cone Width:20.638 mm; db - Cone Backface Backing Diameter:45.97 mm; d:34.925 mm; Cage Type:Stamped Steel; Series:14500; e - ISO Factor8:0.35; |
SMITH CR-1/2 Cam Follower and Track Roller - Stud Type | Shape:T-Shaped; Days to Ship:8 Days; Bearing Part Number:6004; Thickness T(mm):51 ~ 80; RoHS:6; Lateral Width L(mm):82; C Chamfered:Not Provided; Thickness, Height Indication:T, h Configurable; Holder Surface Treatment:Clear Anodize; Height H(mm):30 ~ 60; |
SMITH MCRV-19-S Cam Follower and Track Roller - Stud Type | Height Indication:Height Selection; Volume Discount:Available; Width T(mm):19; Height H(mm):50; Days to Ship:8 Days; Number of Bearings:Single; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; |
SMITH CR-1/2-X Cam Follower and Track Roller - Stud Type | Height Indication:Height Configurable; Type:Bearings with Housin; C Chamfered:Not Provided; Seals:VV (Non-Contact Rubb; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):17; Number of Bearings:Single; Shape:T-Shaped; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; |
SMITH MYRV-17-C Cam Follower and Track Roller - Yoke Type | N:18mm; A1:16 mm; d:60 mm; A:53.5 mm; Weight:4.7 kg; e:34 mm; T min.:-40 °C; A2:72.8 mm; L:175 mm; Designation of housing:FE212-; |
SMITH BCR-2-1/2-X Cam Follower and Track Roller - Stud Type | A2:30 mm; N:22mm; N2:37 mm; Designation of open end cover:SCOU207-21; H2:64 mm; L:129 mm; H1:89 mm; Designation of bearing:UC207-21G2; H:102 mm; d:33.34 mm; |
SMITH YR-3-1/2-C Cam Follower and Track Roller - Yoke Type | Lubrication Type:Relubricatable; Angle between Set Screws:90 º; Material:Bearing Steel; Weight:0.50 lb; Seal Type:Narrow Shroud; Outside Ring Width C:14.000 mm; Outside Diameter D:1.850 in; Dynamic Load Rating:3190 lbf; Center of Bearing from End S:8.86 mm; O.D. Type:Cylindrical OD; |
SMITH YR-3-1/2 Cam Follower and Track Roller - Yoke Type | Type:Bearings with Housin; Flange O.D. H(φ):77; Width T(mm):35 ~ 50; Bearing Part Number:6905; Seals:VV (Non-Contact Rubb; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Days to Ship:8 Days; Shape:Flanged Pilot Type; |
SMITH MCR-32-C Cam Follower and Track Roller - Stud Type | D:75.000 mm; Ce - Dynamic Radial Rating1:27000 N; Limiting Speed (Grease):17900 rpm; R - Inner Ring To Clear Radius2:1.0 mm; r - Outer Ring To Clear Radius3:1.0 mm; Bearing Width:16 mm; Da - Outer Ring Backing Diameter:69.300 mm; Cage Type:CR - Phenolic Outer; Design Units:METRIC; Ball Type:STEEL; |
SMITH MCR-80-B Cam Follower and Track Roller - Stud Type Video
SMITH BEARING MCR-80-SB CAM FOLLOWER STUD
PRODUCT OVERVIEW: SMITH BEARING MCR-80-SB CAM FOLLOWER STUD. STUD LENGTH: 63MM. STUD DIAMETER: 30MM. STATIC LIMIT: 19,109LBS. PURCHASE OPTIONS:.STUD DIAMETER: 30MMSTUD LENGTH: 63MMMissing: B | Must include: B
MCR-80-B - Detail - Manufacturer of Smith Bearing Cam ...
(D) Roller O.D. (mm), 80. (C) Roller Width (mm), 35 ... (B) Overall Length (mm), 100. (G) Thread (mm), M30x1.5 ... SMITH Bearing® Number, MCR-80-B.
smith bearing mcr-80-sbc
Looking for SMITH BEARING MCR-80-SBC BEARING? Price $198.05 + Free Shipping! ... Roller Diameter, 3.15 Inch | 80 Millimeter. Profile, Stud Type.Roller Width: 1.378 Inch | 35 MillimeterOther Features: CagedThread Size: M30X1.5Seal Type: Sealed
smith-cam-followers-full-catalog.pdf - Accent Bearings ...
The MCR & MYR Metric Needle Roller Bearings are recommended ... Sealed or Unsealed. X = Sealed. 12. SMITH Bearing® Number. D. B.116 pages
Metric Need Bearing Cam Follower, MCR-80 - Zoro Tools
Order Smith Bearing Metric Need Bearing Cam Follower, MCR-80, MCR-80 at Zoro.com. Great prices & free shipping on orders over $50 when you sign in or sign ...
smith bearing mcr-80-b - Cam Follower and Track Roller ...
MCR-80-B NEEDLE BRG CAM FOLLOWER ; CAGED STUD TYPE HEX HEAD SLOT SEALED. 80MM Roller Diameter; 35MM Roller Width; Crowned Roller Surface Profile; ...
SMITH MCR-80-SB Cam Follower and Track Roller - Stud Type
Cam Follower and Track Roller - Stud Type offers a SMITH MCR-80-SB Cam ... Clearance:: Standard; Seals or Shields:: Open Type; B: 20mm; D: 110mm; d: 70mm.