| No. | Brand | Z | D | e | S | J | G | L | b |
| DYR-2-1/2 | SMITH | - | - | - | - | - | - | - | - |
| BYR-2-3/4-XC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-16-BC | SMITH | - | - | - | - | - | - | - | - |
| MCRV-52-SBC | SMITH | - | - | 21 mm | 9 mm | 102 mm | - | 130 mm | - |
| PYR-5 | SMITH | - | 105 | - | - | - | - | - | - |
| YR-3/4-X | SMITH | - | - | - | - | - | - | - | - |
| HR-3-1/4-C | SMITH | - | - | - | - | - | - | - | 3 mm |
| YR-1-7/8-XC | SMITH | - | - | - | - | - | - | - | - |
| CR-1/2-C | SMITH | 49.6 mm | - | 20 mm | - | - | - | - | - |
| MUTD-25 | SMITH | - | - | - | - | - | - | - | - |
| MFCR-76 | SMITH | - | - | 12.6 mm | 7.5 mm | 96 mm | - | - | - |
| HR-1-5/8-C | SMITH | - | 90 mm | - | 24.6 mm | - | - | - | - |
| YAG-24 | SMITH | - | - | 9.0 mm | - | - | - | - | - |
| MYR-10-SC | SMITH | - | - | - | - | - | - | - | - |
| MCR-47-B | SMITH | - | - | - | - | - | - | - | - |
| DYR-2-3/4 | SMITH | - | - | - | - | - | - | - | - |
| MCR-80-B | SMITH | - | - | - | - | - | - | - | - |
| MCR-16-BC | SMITH | - | - | - | - | - | - | - | - |
| CR-7/8-XBC-SS | SMITH | 17.2 mm | - | - | - | - | - | 84 mm | - |
| MCRV-30-SC | SMITH | - | - | 10 mm | 11 mm | - | M6x1 | 165 mm | - |
| CR-2-3/4-XB | SMITH | - | - | - | 31 mm | - | - | 195 mm | - |
| BYR-1-7/8 | SMITH | - | - | - | - | - | - | - | - |
| MCRV-19-S | SMITH | - | - | - | - | - | - | - | - |
| SMITH PYR-3 Cam Follower and Track Roller - Yoke Type | G:R1/8"; T max.:100 °C; A1:10 mm; B:34 mm; d:15.88 mm; C:12.8 kN; B1:43.5 mm; s1:30.5 mm; L:61 mm; H:112 mm; |
| SMITH MCRV-32-SBC Cam Follower and Track Roller - Stud Type | Bearing Material:Stainless Steel; Number of Bearings:Single; Volume Discount:Available; Bearing Part Number:628; Shape:Flange Type; Holder Surface Treatment:Not Provided; Width T(mm):13; Flange O.D. H(φ):47; Bearing I.D. d(mm):8; |
| SMITH YR-1-1/2-C Cam Follower and Track Roller - Yoke Type | B:49.2 mm; T max.:100 °C; C:31.85 kN; G:R1/8"; s1:24.6 mm; A:36.5 mm; A4:32.5 mm; e:20 mm; A2:50.2 mm; Recommended tightening torque for set screw:8 Nm; |
| SMITH IRR-2-1/2 Roller Bearings | Bearing Style:Open Type; Accuracy Symbol:P5; Type:Angular Contact Ball; Max. Allowed rpm(rpm):6300; Inner/Outer Ring Material:Steel; Outer Ring Shape:Flat; Basic Dynamic Load Rating(N):50500; Preload Mark:/GN; D:90; Rolling Element Material:Steel; |
| SMITH MVYR-62 Cam Follower and Track Roller - Yoke Type | Fit:J7; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; B:112; Bearing Unit, Type:Pillow Type; Surface Treatment:No; Seal:Nitrile; Basic Load Rating, Dynamic Rating(N):133000; |
| SMITH MCR-16-BC Cam Follower and Track Roller - Stud Type | Backing Shaft Diameter ds:330.4 mm; Lubrication Hole Diameter h:9.5 mm; O.D. D:420.000 mm; Lubrication Groove g:19.3 mm; Width B:118.000 mm; Weight:110.000 lb; Thermal Speed Ratings - Oil:880 rpm; Chamfer rsmin:3.00 mm; Bore d:300 mm; Thermal Speed Ratings - Grease:780 rpm; |
| SMITH BYR-2-3/4 Cam Follower and Track Roller - Yoke Type | Seal, Shield:No; Lubricant:No; Retainer Type:No; Number of Raceway Ring Rows:Double Row; Rolling Element Material:Steel; Specifications/Environment:Standard; Specifications:Tapered hole; Raceway Ring Shape:Cylindrical Roller; Internal Clearance Symbol:No; Load Direction:Radial / Thrust; |
| SMITH HR-3-1/4-C Cam Follower and Track Roller - Stud Type | Radial clearance class:C3; Mass:0.16 kg; d2:30.5 mm; Y1:2; Characteristic rolling element frequency, BSF:4.85 Hz; Dynamic load, C:57.3 kN; rs min:1 mm; Number of lubrication holes:3; b:3 mm; Min operating temperature, Tmin:-40 °C; |
| SMITH CR-1-7/8-XBE Cam Follower and Track Roller - Stud Type | J:63.5 mm; Dz:54 mm; Designation of bearing:UC202G2; B:31 mm; A2:37.3 mm; e:19 mm; A:29.5 mm; T min.:-20 °C; Z:40.8 mm; d:15 mm; |
| SMITH MCR-52-B Cam Follower and Track Roller - Stud Type | Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:606; Shape:Flanged Pilot Type; Flange O.D. H(φ):41; Housing Material:304 Stainless Steel; Bearing I.D. d(mm):6; Number of Bearings:Double; Holder Surface Treatment:Not Provided; |
| SMITH YAF-14 Cam Follower and Track Roller - Yoke Type | T max.:200 °C; L:135 mm; S:8.5 mm; Designation of housing:FC207N-; Designation of open end cover:SCOU207-22; A2:34.5 mm; s1:16 mm; Designation of bearing:US207-22G2T20; Recommended tightening torque for set screw:8 Nm; d:34.92 mm; |
| SMITH CR-3/4-C Cam Follower and Track Roller - Stud Type | Series Type:Medium Series; Dimension L:11.0 in; Support Type:Two-Bolt Plummer Blo; Bearing Number:MSE111BX; Bolt Size:2 x M16; Dimension H:3.150 in; Dimension H2:7.1 in; Cor - Static Load Rating:28551 lbf; Weight:30 lb; Note:This product line wa; |
SMITH CR-3-1/2-XC Cam Follower and Track Roller - Stud Type Video