| SMITH MYR-45-C Cam Follower and Track Roller - Yoke Type | r:1.1; C1:5.8 mm; G:M8x1; d1:51.1 mm; d:35 mm; S:18.8 mm; B1:51.1 mm; Weight:0.6 kg; B2:17.5 mm; D:72 mm; |
| SMITH CR-1-5/8-XB-SS Cam Follower and Track Roller - Stud Type | f0:13.9; Static load, C0:5.05 kN; Max operating temperature, Tmax:110 °C; ra max:0.6 mm; D:42 mm; Characteristic inner ring frequency, BPFI:5.41 Hz; d:20 mm; da min:24 mm; Mass:0.07 kg; B:12 mm; |
| SMITH BCR-1-1/2-B Cam Follower and Track Roller - Stud Type | Retainer Type:Punching; Load Direction:Radial; Precision Grade Symbol:No; Special Configurations Code:No; Clearance sign:CN (standard); Seal, Shield Symbols:No; Specifications, Environment:Standard; Max. Allowed rpm(rpm):15000; Size Standards:Metric System; Bearing type symbol:No; |
| SMITH CR-2-3/4-XB Cam Follower and Track Roller - Stud Type | B:61.9 mm; T max.:100 °C; L:195 mm; Designation of housing:FS312-; Weight:7.85 kg; A1:22 mm; Designation of bearing:EX312-36G2; Recommended tightening torque for set screw:16.8 Nm; S:31 mm; A2:67.4 mm; |
| SMITH MFCR-76 Cam Follower and Track Roller - Stud Type | Weight:0.59 kg; C0:7.88 kN; T max.:200 °C; s1:24.2 mm; H:97 mm; C:14 kN; S:7.5 mm; e:12.6 mm; Recommended tightening torque for set screw:5.5 Nm; J:96 mm; |
| SMITH CR-2-1/2-C Cam Follower and Track Roller - Stud Type | Characteristic inner ring frequency, BPFI:5.43 Hz; da min:35 mm; Brand:SNR; d1:37.9 mm; Characteristic cage frequency, FTF:0.4 Hz; Static load, C0:0.01 kN; D1:55.1 mm; d:30 mm; Characteristic rolling element frequency, BSF:4.62 Hz; D:62 mm; |
| SMITH MCR-52-B Cam Follower and Track Roller - Stud Type | Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:606; Shape:Flanged Pilot Type; Flange O.D. H(φ):41; Housing Material:304 Stainless Steel; Bearing I.D. d(mm):6; Number of Bearings:Double; Holder Surface Treatment:Not Provided; |
| SMITH CR-3-1/2-XC Cam Follower and Track Roller - Stud Type | Bearing Used:Deep Groove Ball Bea; Height Indication:Height Selection; Bearing I.D. d(mm):20; Number of Bearings:Single; Width T(mm):15; Lateral Width L(mm):73; Volume Discount:Available; Bearing Part Number:6904; |
| SMITH BCR-2-1/2-X Cam Follower and Track Roller - Stud Type | A2:30 mm; N:22mm; N2:37 mm; Designation of open end cover:SCOU207-21; H2:64 mm; L:129 mm; H1:89 mm; Designation of bearing:UC207-21G2; H:102 mm; d:33.34 mm; |
| SMITH YAG-24 Cam Follower and Track Roller - Yoke Type | Appropriate Withdrawal Nut No.:HM3180; Thread D12:Tr400x5; e:9.0 mm; t:15 mm; d1:360.00 mm; L1:284.00 mm; Ro:G1/4; Appropriate Hydraulic Nut:HMV80; Weight:42.10 Kg; |
| SMITH CR-1-7/8-XBC-SS Cam Follower and Track Roller - Stud Type | Bearing Number:22213; e - Geometry Factor:0.24; Dimension D Max:8.63 in; Dimension L:3.59 in; Housing Style:Two-Bolt Pillow Bloc; Grease Lubrication - B/C/O Seal:1500 rpm; Shaft Tolerance:0.0015 in; Dimension M:2.13 in; Dimension F:10.250 in; Dimension H:1.38 in; |
| SMITH IRR-2-7/16 Roller Bearings | Revolution Frequency(rpm):16000; Outer Ring Type:Flat; Basic Load Rating, Dynamic Rating(N):11800; Size Standards:Metric System; Inner/Outer Ring Material:Steel; Rolling Element Material:Steel; d:14; B:20; Specifications/Environment:Standard; |