| SMITH MUTD-50110 Cam Follower and Track Roller - Yoke Type | Weight:2.33 kg; T max.:100 °C; C0:24 kN; G:M6x1; Recommended tightening torque for set screw:16.8 Nm; s1:41.25 mm; Designation of housing:C308-; d1:63.5 mm; C:40.56 kN; A3:3 mm; |
| SMITH BCR-3/4-XC Cam Follower and Track Roller - Stud Type | Static load, C0:336 kN; rs min:3 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:295 kN; r1a max:2.5 mm; Characteristic outer ring frequency, BPF0:5.64 Hz; Characteristic rolling element frequency, BSF:4.96 Hz; Dc max:158 mm; Fatigue limit load, Cu:37.5 kN; Nref:3,600 rpm; |
| SMITH BCR-3-BC Cam Follower and Track Roller - Stud Type | Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):6; Lateral Width L(mm):49; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Height Indication:Height Selection; Type:Bearings with Housin; |
| SMITH YAG-32 Cam Follower and Track Roller - Yoke Type | Height Indication:Height Selection; Bearing Material:[Steel] Steel; Days to Ship:8 Days; Number of Bearings:Single; Shape:T-Shaped; Type:Bearings with Housin; Holder Surface Treatment:Black Oxide Coating; Bearing I.D. d(mm):17; Height H(mm):30 ～ 50; |
| SMITH MYR-35-SC Cam Follower and Track Roller - Yoke Type | Characteristic outer ring frequency, BPF0:18.67 Hz; Fw:56 mm; Nlim (grease):5,000 rpm; Characteristic cage frequency, FTF:0.48 Hz; b:17.8 mm; Mass:0.03 kg; Ew:61 mm; Characteristic inner ring frequency, BPFI:20.33 Hz; Dw:2.5 mm; Cr:23.3 kN; |
| SMITH DYR-5 Cam Follower and Track Roller - Yoke Type | Shaft Size Type:Imperial; Grease Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - M/N Seal:900 rpm; UPC Code:0883450089241; Shaft Size :3-3/4 in; Dimension D Min:10.88 in; Dimension C:5.5 in; Y2 - Geometry Factor:4.06; Eng Internal Radial Clearance - Min:0.0053; Dimension RVV:0.58 in; |
| SMITH MYRV-5-C Cam Follower and Track Roller - Yoke Type | R - Cone Backface To Clear Radius1:0.09 in; Cup Part Number:552DC; db - Cone Backface Backing Diameter:2.6 in; T - Bearing Width across Cones:3.1249 in; Design Units:Imperial; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:74700 lbf; B - Cone Width:1.4440 in; Bearing Weight:10.36 lb; Cone Part Number:555; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:19400 lbf; |
| SMITH YR-3-1/2 Cam Follower and Track Roller - Yoke Type | Type:Bearings with Housin; Flange O.D. H(φ):77; Width T(mm):35 ～ 50; Bearing Part Number:6905; Seals:VV (Non-Contact Rubb; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Days to Ship:8 Days; Shape:Flanged Pilot Type; |
| SMITH MCR-52-B Cam Follower and Track Roller - Stud Type | Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:606; Shape:Flanged Pilot Type; Flange O.D. H(φ):41; Housing Material:304 Stainless Steel; Bearing I.D. d(mm):6; Number of Bearings:Double; Holder Surface Treatment:Not Provided; |
| SMITH MYRV-40 Cam Follower and Track Roller - Yoke Type | Manufacturer Name:NTN; Lubrication hole on outer ring:Non/No; Min operating temperature, Tmin:-20 °C; Nlim (grease):11,000 rpm; C:12 mm; Minimum Buy Quantity:N/A; Mass:0.01 kg; Category:Bearings; Product Group:B04144; Weight / Kilogram:0.01; |
| SMITH YR-1-1/4-XC Cam Follower and Track Roller - Yoke Type | Note:This product line wa; Cr - Dynamic Load Rating:103187 lbf; Bearing Type:Split Cylindrical Ex; Dimension J:430 mm; Cor - Static Load Rating:149273 lbf; Dimension M:180 mm; Seal Type:Viton Single Lip; Dimension L:510 mm; Support Type:Four-Bolt Plummer Bl; Dimension K:100 mm; |
| SMITH MVYR-62 Cam Follower and Track Roller - Yoke Type | Fit:J7; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; B:112; Bearing Unit, Type:Pillow Type; Surface Treatment:No; Seal:Nitrile; Basic Load Rating, Dynamic Rating(N):133000; |