No. | Brand | Z | D | e | S | J | G | L | b |
MFCR-72 | SMITH | - | 140 | - | - | - | - | - | - |
MYRV-40 | SMITH | - | - | - | - | - | - | - | - |
HR-3-1/2-XB | SMITH | - | - | - | - | - | - | - | - |
BYR-7/8-X | SMITH | 58.9 mm | - | - | 17.5 mm | 82.6 mm | - | 103 mm | - |
CR-1/2-C | SMITH | 49.6 mm | - | 20 mm | - | - | - | - | - |
HR-1-5/8-C | SMITH | - | 90 mm | - | 24.6 mm | - | - | - | - |
BCR-1-1/2-XBC | SMITH | - | - | - | - | - | - | - | - |
BCR-3-BC | SMITH | - | - | - | - | - | - | - | - |
BCR-5/8-XB | SMITH | - | - | - | - | - | - | - | - |
BCR-2-1/2-X | SMITH | - | - | - | - | - | - | 129 mm | - |
YAF-04 | SMITH | - | - | - | - | - | - | - | - |
IRR-2-5/8 | SMITH | 18.5 mm | - | - | - | - | R1/8" | - | - |
YAG-24 | SMITH | - | - | 9.0 mm | - | - | - | - | - |
YR-3-1/2-C | SMITH | - | - | - | - | - | - | - | - |
MCR-32-BC | SMITH | 74.6 mm | - | - | - | 159 mm | - | 206 mm | - |
IRR-3/8 | SMITH | - | - | 24 mm | 19 mm | - | - | - | - |
MVYR-62 | SMITH | - | - | - | - | - | - | - | - |
BYR-2-3/4-XC | SMITH | - | - | - | - | - | - | - | - |
MCR-72-BC | SMITH | - | - | - | - | - | - | - | - |
CR-1-7/8-XBE | SMITH | 40.8 mm | - | 19 mm | - | 63.5 mm | - | - | - |
BCR-1-1/4 | SMITH | - | - | - | - | - | - | - | - |
YR-3/4-X | SMITH | - | - | - | - | - | - | - | - |
CR-3-X | SMITH | - | - | - | 19 mm | - | M6x1 | - | - |
PYR-3-1/4 | SMITH | - | - | - | - | - | - | - | - |
MFCR-76 | SMITH | - | - | 12.6 mm | 7.5 mm | 96 mm | - | - | - |
MCR-32-SBC | SMITH | - | - | - | 6.5 mm | - | M6x1 | - | - |
MCRV-52-SBC | SMITH | - | - | 21 mm | 9 mm | 102 mm | - | 130 mm | - |
SMITH YR-1-1/8-X Cam Follower and Track Roller - Yoke Type | Bolt Size:4 x M24; Dimension V:0.1 in; Dimension L:7.2 in; Note:This product line wa; Support Type:Round Flange; Bearing - Housing - Seal:LSE508BRHHTPS; Bearing UPC:013992027283; Bearing Number:LSE508BR; Maximum Speed:1570 rpm; Dimension T:17.5 in; |
SMITH CR-1-1/4-XBE Cam Follower and Track Roller - Stud Type | Seals:ZZ (Double Shield); RoHS:6; Flange O.D. H(φ):54; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; |
SMITH IRR-2-7/16 Roller Bearings | Revolution Frequency(rpm):16000; Outer Ring Type:Flat; Basic Load Rating, Dynamic Rating(N):11800; Size Standards:Metric System; Inner/Outer Ring Material:Steel; Rolling Element Material:Steel; d:14; B:20; Specifications/Environment:Standard; |
SMITH MUTD-20 Cam Follower and Track Roller - Yoke Type | A1:12 mm; Designation of housing:FCE209-; d:44.45 mm; B:42.8 mm; S:21.4 mm; G:M6x1; L:155 mm; Designation of bearing:EX209-28G2L4; H3:105; B1:56.3 mm; |
SMITH MCRV-16-BC Cam Follower and Track Roller - Stud Type | DD:158.9 mm; d:90 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:534000 N; Cone Part Number:JHH221436; a - Effective Center Location4:-15 mm; Aa - Cage-Cone Backface Clearance:2 mm; Design Units:METRIC; B - Cone Width:57.531 mm; Cg - Geometry Factor:0.107; G2 - Heat Generation Factor (Rib-Roller End):28.4; |
SMITH HR-1-1/2-BC Cam Follower and Track Roller - Stud Type | T max.:100 °C; T min.:-20 °C; d:23.81 mm; C1:6.5 mm; B1:38 mm; Weight:0.6 kg; d1:45 mm; C0:15.2 kN; C:24 mm; B2:8 mm; |
SMITH MYRV-35 Cam Follower and Track Roller - Yoke Type | Inner Ring Width B:34.92 mm; Dimension B1:1.748 in; Outside Diameter D:2.047 in; Outside Ring Width C:15.000 mm; Number of Set Screws:2; Sub Series:1..KPPB2,3,4; Seal Type:Shroud Seal; Shaft Size d:7/8 in; Bore Type:Cylindrical bore; Dimension B2:0.531 in; |
SMITH BCR-2-BC Cam Follower and Track Roller - Stud Type | Rolling Element Material:Stainless Steel; Size Standards:Metric System; RoHS:6; Retainer Type:Punching; D:21; Volume Discount:Available; Type:Ball; Outer Ring Shape:Flat; Inner/Outer Ring Material:Stainless Steel; |
SMITH BCR-2-3/4 Cam Follower and Track Roller - Stud Type | Dimension J:750 mm; Note:This product line wa; Series Type:Light Series; Maximum Speed:650 rpm; Cr - Dynamic Load Rating:208848 lbf; Bolt Size:4 x M36; Housing Width:8.5 in; Dimension H2:662 mm; Seal Type:Viton Single Lip; Dimension K:200 mm; |
SMITH MCRV-30-SC Cam Follower and Track Roller - Stud Type | L:165 mm; A2:42.7 mm; e:10 mm; G:M6x1; Weight:2.9 kg; T max.:100 °C; S:11 mm; d:50 mm; Recommended tightening torque for set screw:11.5 Nm; C:35.1 kN; |
SMITH CR-2-1/2-XC Cam Follower and Track Roller - Stud Type | Bearing I.D. d(mm):10; Flange Shape:Compact Type; Bearing Material:Stainless Steel; Number of Bearings:Double; Type:Bearings with Housin; Shape:Flange Type; Days to Ship:8 Days; Seals:ZZ (Double Shield); Width T(mm):40; |
SMITH HR-1-1/4-C Cam Follower and Track Roller - Stud Type | Fit:J7; Unit Body Material:Cast Iron; Days to Ship:8 Days; Surface Treatment:No; Stroke:No; Diameter series symbol:Medium Load; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; RoHS:6; |
SMITH CR-1/2-A-C Cam Follower and Track Roller - Stud Type Video